Testbed

From Physical Layer Security
Revision as of 15:04, 27 October 2017 by Zallmann (talk | contribs) (Prepare the Host)

Jump to: navigation, search

To setup the Testbed, one can simply follow the instructions below. For a successfull measurement one should follow the instruction precisely.

Required Material for our Testbed

  • HOST PC with Ubuntu installed
  • 2x Raspberry Pi
  • 2x USB - Extension Cable
  • 1x Powerbank
  • 1x Power Supply
  • 3x CC2531 Sticks (TI)
  • 2x SD Card (16GB or more recommend)
  • 2x WLAN Stick (in this case TL-WN722N)

Prepare the Host

To prpeare the Host please follow the next instructions. Please enter the commandline by opening terminal or pressing CTRL+ALT+T. After that enter the following line to prepare your host system.

Please execute line by line (The console lines are in a box)


libsodium

sudo apt-get install autoconf autogen
sudo apt-get install gpp
sudo apt-get install g++ 
sudo apt-get install libtool
sudo add-apt-repository ppa:chris-lea/libsodium

next things have to be done by root

sudo su
echo "deb http://ppa.launchpad.net/chris-lea/libsodium/ubuntu trusty main" >> /etc/apt/sources.list
echo "deb-src http://ppa.launchpad.net/chris-lea/libsodium/ubuntu trusty main" >> /etc/apt/sources.list
apt-get update && sudo apt-get install libsodium-dev
exit

from here no root shell required zmq

wget https://github.com/zeromq/zeromq4-1/releases/download/v4.1.4/zeromq-4.1.4.tar.gz
tar -xvzf zeromq-4.1.4.tar.gz
cd zeromq-4.1.4
./autogen.sh
./configure
make -j 4
make check
sudo make install
sudo ldconfig

python packages

sudo apt-get install python-zmq python-dev python-qt4 libzmq3-dev python-numpy